Protection for welders and more

Go to TOP
Go to MIG  gloves
Go to TIG  gloves
Go to garments
Go to TOP
Go to handling  gloves
Go to handling  gloves
Go to electrode holders
Go to TOP
Go to garments
Go to ground clamps
Go to TOP
Go to accessories
Go to electrode holders
Go to TOP
Go to TOP
Go to ground clamps
Go to eye protection
Go to TOP
Go to TOP

EP134

EP043

CS

CP

GC18

GC19

GC20

GC21

GC16

GC17

TYPE E

GC15

GC11

TYPE C

GC12

GC13

GC14

TYPE D

EP128

Available in smoke and clear version

Available in smoke, clear and amber version

EP135

EP133

GL127

Aluminised back, leather handshield for use in conjunction with welding gloves to reflect radiant heat.

MIG gloves

TIG gloves

Handling gloves

Garments

Electrode holders

Ground clamps

Accessories

Eye protection

GL026

Black polyurethane palm coated glovewith a 13 gauge seamless, grey nylon liner. Superior dexterity and sensitivity. Elasticated knit wrist Ideal for electronic and computer assembly and small parts handling. Conforms to EN420, EN388 Cat 2

Orange latex palm coated glove with a textured finish offering improved grip in both wet and dry conditions. Knit wrist.10 gauge cotton/polyester shell. Coated fingert ips and thumb crotch minimize wear in critical areas. Conforms to EN420, EN388 Cat 2

GL063

Cow grain leather drivers style glove. Red, full fleece lining to glove.Gunn cut to ensure good flexibility and with no seams to cause irritation or discomfort. Keystone thumb construction. Red binding around cuff edge.Conforms to EN420, EN388 Cat 2

PU palm coated, cut level 5, high performance glove. Polyurethane palm and fingertip coating offers superior grip in the toughest dry/wet conditions. Abrasion and tear resistance and excellent grease and oil resistance. Conforms to EN420, EN388 Cat 2

Supergrip cabling glove. Seamless construction for comfort and an open back for breathability. Close fitting for maximum dexterity. Elasticated wrist with velcro tab. Glove is entirely lint free and can also be safely laundered. Conforms to EN420, EN388 Cat 2

GL029

GL016

High quality black welders gauntlet, made from cowsplit leather, features wing thumb, fully weltedfingers. Jersey lining to palm, with cotton liningto cuff. Fully Kevlar stitched. CE approved to EN 12477 A

 

GL121

Heavy duty tan welders gauntlet. Made from highquality selected Cow side split leather, featuringwing thumb with reinforced overlay, fully weltedfingers & seams, fully Kevlar stitched, full jerseylining to palm and cotton lining to cuff.CE approved to EN12477 A

 

GL122

High quality selected nappa leather palm withcow split leather cuff, Mig/Tig welders gauntlet.Full 15cm cuff, Kevlar stitched, Wing thumb withreinforcement, vein patch. Jersey fleece lined forgreater comfort. CE approved to EN 12477 A

 

GL116

Red welders gauntlet, made from cowsplit leather, features wing thumb, fully weltedfingers. Jersey lining to palm, with cotton liningto cuff. Kevlar and none Kevlar version.CE approved to EN 12477 A

 

Ultra high quality Mig welding gauntlet featuring,selected shoulder split 1.3mm leather, fully Kevlarstitched and fully welted with re-enforced palm,thumb crotch with wing thumb. Heavy duty jerseyfleece liner to palm and back.CE approved to EN12477A

 

GL060

Superior curved reinforced MIG weldersgauntlet, ergonomically designed to fit thenatural curve of the hand, made from high qualityselected cow shoulder split leather, fully weltedfingers & seams, reinforced thumb crotch, wingthumb, lined in a special fleece style fabric.Fully Kevlar stitched .CE approved to EN12477A

 

GL120

Lightweight traditional TIG welders gauntlet with chrome split cuff. Unlined for added dexterity. Kevlar stitched, goat skin. CE approved to EN12477 B

 

GL084

TIG welding gauntlet made from high quality sheep skin, fully Kevlar stitched. The gunn cut pattern straight thumb makes it easy togrip objects and the wraparound first finger ensures greater abrasion resistance and dexterity. CE approved to EN12477 B 

GL130

Aluminised back cow split leather weldin ggauntlet, suitable for protection against extreme heat. Heavy Duty 1.3mm cow split leather, aluminised Kevlar back, wing thumb,fully welted construction, Kevlar stitched. Withstands 100 °C contact heat.

CE approved to EN12477A

GL124

High quality split leather canadian rigger's glove with 6cm rubberised cuff. Full finger tip protection with wraparound first finger, knuckle protector & vein patch.CE approved to EN 420 & EN 388 CAT 2.

Ultra high quality cow split leather Canadian pattern riggers gloves with rubberised cuff. Featuring wing thumb, wraparound first finger, fully welted, stylish reinforced palm with vein patch. Back has drill back with leather knuckle protector and leather finger tips. Full jersey lined. Conforms to EN388 Cat 2.

Superior CURVED “Texan” reinforced handlers glove, ergonomically designed to fit the natural curve of the hand, made from high quality selected cow shoulder split leather, fully welted fingers & seams, reinforced thumb crotch, wingthumb, lined in a special fleece style fabric. Conforms to EN420, EN388 Cat 2

GL132

GL043

GL134

Flame retardant welding hood.Long version.

 

HT040

Flame retardant welding hood.Short version.

 

HT039

AC211

GL137

AC205

Heavy duty sleeve. Velcro adjustments - top and bottom. KEVLAR stitched. Cow split leather. Sold in pairs. CE approved to EN ISO11611:2015

 

Low leg tan/natural split leather welders gaiters with Velcro fastening. KEVLAR stitched.CE approved to EN ISO11611:2015

 

High leg tan split leather welders gaiters with Velcro fastening.KEVLAR stitched CE approved to EN ISO11611:2015

 

100 x 80cm tan cow split leather welders apron, KEVLAR stitched, strap adjustment. CE approved to EN ISO11611:2015

AP009

Bolero shoulder welding jacket and apron, high abrasion tan split leather, offers more freedom of movement and is considerably more comfortable that the conventional welding garment. It has a reinforced stud front and is supplied with the detachable apron specifically designed for use with the bollero. KEVLAR stitched. Sizes: M to XXXL

JK941

Full leather welding trousers, abrasion resistant, cow split leather. Full KEVLAR stitching, features two side pockets with side access, seven belt loops and reinforced stress areas.CE approved to EN ISO11611:2015, Sizes: M to XXXL

TR615

JK936

JK269

Full leather welding jacket, abrasion resistant cow split leather, concealed stud front, reinforced placket, designed to withstand mechanical and thermal stress.Full KEVLAR stitching, with mandarin collar, internal pocket and lined collar for additional comfort. CE approved to EN ISO11611:2015, Sizes: M to XXXL

GL004

GL001

Lightweight leather & FR fabric, welders jacket, designed for maximum comfort and safety. Heavy-duty side split leather chest and sleeves provide
superior protection for both Mig & Tig welding. KEVLAR stitched. The flame retardant cloth back
offers ultimate levels of comfort and keeps you cool even in humid conditions. For spatter protection, the flip up high collar is secured by velcro which enhances the full velcro overlay to the front.
CE approved to EN ISO11611:2015
Sizes: M to XXXL

GC09

GC10

GC08

GC05

GC04

TYPE B

GC06

GC07

GC01

GC02

GC03

TYPE I

TYPE H

TYPE G

TYPE D

TYPE E

TYPE F

TYPE A

TYPE B

TYPE C

Phoenix-FR Flame retardant balaclava black EN ISO11612:2008  A1 B1 C1, EN1149-3:2004 + EN1149-5:2008

HT041

Phoenix-FR woven flame retardant, welding poloshirt featuring 3 button placket. EN ISO 11612:2015  A1 A2 B1 C1, EN ISO 11611:2015 Class 1 A1,  EN1149-3:2004-EN1149-5:2008

PS137

Phoenix-FR knitted jersey FR welding polo shirt featuring High zip, Navy with yellow contrasting placket & collar yoke. EN ISO 11612:2015, A1 ,A2, B1, C1, EN1149-3:2004 + EN1149-5:2008

Phoenix-FR woven flame retardant sweat shirt,featuring elasticated neck,elasticated wrists & waist.EN ISO 11612:2015  A1 B1 C2, EN ISO 11611:2015 Class 1 A1,  EN1149-3:2004-EN1149-5:2008

Phoenix-FR woven flame retardant fleece jacket, featuring full zip front with contrasting plackett, elasticated wrists. EN ISO 11612:2008  A1 B1 C2, EN ISO 11611:2015 Class 1 A1,  EN1149-3:2004-EN1149-5:2008

PS153

SS015

FL534

TYPE A